Today there are still many people for the stacking manipulator basic content is not very well understood, as manufacturers, we are also a simple explanation, in fact, the stacking manipulator is suitable for packaging boxes, bags electrical panels, tiles and other parts of the automatic palletizing. So in operation on mainly by replacing the robot gripper to complete the stacking and disassembly of different items, relatively reduce the purchase cost of customers. And is suitable for chemical, beverage, food, beer, plastic and other automated production enterprises; for a variety of cartons, bags, cans, beer boxes and other packaging shapes. And also need to pay attention to when using is through the detection of suction cups and balancing cylinder gas pressure, can automatically identify whether there is a load on the robot arm, and through the pneumatic logic control circuit automatically adjust the pressure in the balancing cylinder, to achieve the purpose of automatic balancing. So the stacking robot works with its weight as if it were suspended in the air and can avoid collisions of products during docking. Within the working range of the robot arm, the operator can easily move it to any position and can operate it with ease.

At the same time, the pneumatic circuit of the stacking manipulator has interlocking protection against misoperation and loss of pressure. It is therefore very important to note that the pneumatic counterbalance lift does not require an electrical control system and only requires compressed air and a vacuum source (depending on the job) to work, which is very convenient. The stacking robot's stacking capacity is much higher than that of traditional stackers and manual stackers, with a very simple structure, low failure rate, easy maintenance and repair, and its main components have few parts, low maintenance costs, low power consumption, and stacking robots, power consumption is about one fifth of that of mechanical stackers, the palletizing robot arm can be set up in a narrow space, the site is used efficiently and the application is flexible. In addition, all operations of the palletizing robot can be done by hand touch on the control cabinet screen, which is very easy to operate, especially its arm is very flexible in its application. One robot arm can handle six different products from more lines at the same time. When products are updated, new data is simply entered, the stacking robot is processed and recalculated for operation without modifying hardware and equipment settings, and the stacking type and number of stacking levels can be set at will for neat stacking and easy storage and transportation.