Stacking manipulators are suitable for the automatic palletizing of parts such as boxes, bags electrical panels and tiles. So in operation on mainly by changing the robot gripper to complete the stacking and dismantling of different items, relatively reduce the purchase cost of customers.

Since the use of stacking manipulators not only facilitate the production of factories, but also facilitate the operation of workers! But any product has a life span, so careful care and maintenance is vital to extend the life of the machine.

1. In daily use, attention should be paid to the recording and storage of maintenance after use. The specific specifications of how the stacking manipulator should be cared for and maintained in the factory have been recorded, so they should be implemented in accordance with the specific rules.

2. Before the stacking manipulator is used, the operator must be trained regularly on how to use the stacking manipulator arm correctly, how to care and maintain it, and the maintenance record sheet must be checked at all times to ensure that all maintenance work is carried out in accordance with the regulations.

3. Be sure to reach an agreement to avoid repairing the stacking robot arm, but usually ignore the maintenance, institutionalise the maintenance work and carry out a quantitative evaluation of the matter by technicians to form a monitoring mechanism.

In short, everything is done by people, by people. If everyone has a sense of responsibility, not only will the life of the stacking robot be extended, the further the enterprise will go.

What industries are stacking manipulators mainly used in

The main thing is to replace the hand of the robot arm to complete the palletizing and unpalletizing of other items. At present, stacking manipulators have quite a wide range of applications at home and abroad. It is mainly aimed at the packaging industry (e.g. carton stacking, bagging, filling, etc.). This also applies to the chemical industry, the plastics industry and the food and beverage industry. The stacking manipulator uses a frame structure that takes up very little space to increase productivity. 10 sets of stacking solutions can be stored inside the programming of the stacking manipulator, which is very convenient and flexible. It is also suitable for use in the electrical, panel and tile industries.

The stacker robot has the following features

By detecting the gas pressure in the suction cups and balancing cylinders, it automatically identifies the presence or absence of load on the robot arm and automatically adjusts the air pressure in the balancing cylinders by means of a pneumatic logic control circuit to achieve the purpose of automatic balancing. When working, heavy loads are suspended as if in the air, avoiding collisions during product docking. Within the working range of the robot arm, the operator can easily move it backwards and forwards, left and right, up and down to any position, and the personnel themselves can easily operate it. At the same time, the pneumatic circuit has interlocking protection functions such as protection against dropped objects and loss of pressure. A very important point is that the whole machine does not require an electrical control system, only compressed air and a vacuum source (depending on the working conditions) to work, which is very convenient.