The glass palletizing robot is suitable for the automatic palletizing of parts such as boxes, bags, electrical panels and tiles. Stacking and dismantling of different items is therefore mainly accomplished by changing the robot's hand claws during operation, relatively reducing the customer's purchase costs. Suitable for chemical, beverage, food, beer, plastic and other automated production companies. Suitable for various packaging shapes, such as cartons, bags, cans, beer boxes, etc. It is important to note in use that by detecting the gas pressure in the suction cups and balancing cylinders, it is possible to automatically identify whether there is a load on the robot arm and automatically adjust the pressure in the balancing cylinder through the pneumatic logic control circuit to achieve the purpose of automatic balancing. As a result, the glass palletizing robot works as if its weight is suspended in the air, which prevents collisions of products during docking. Within the working range of the robot arm, the operator can easily move it to any position and operate it with ease.
At the same time, the pneumatic circuit of the glass palletizing robot has interlocking protection against misoperation and loss of pressure. So it is very important that the pneumatic counterbalance lift does not require an electric control system and only requires compressed air and a vacuum source (depending on the working conditions) to work, which is very convenient. The palletizing robot has a much higher palletizing capacity than traditional stacker cranes and manual stackers, with a simple structure, low failure rate, easy maintenance, few main parts, low maintenance costs and low power consumption. Moreover, the glass palletizing robot can be set up in small spaces, with high efficiency in the use of the site and flexible applications. In addition, all operations of the glass palletizing robot can be done by touching the screen of the control cabinet, so the operation is very simple and especially its arm is very flexible in its application. One robot arm can handle six different products on more production lines at the same time. To update the products, simply enter the new data, the stacking robot factory and recalculate the operation without modifying the hardware equipment settings, and you can set the stacking type and the number of stacking layers at will, stacking neatly and facilitating storage and transport.