When it is cold, we wear more clothes, in fact, many large equipment in winter is afraid of cold, such as glass palletizing manipulator, winter needs the necessary protection, the next understanding of glass palletizing manipulator insulation work is how to carry out.

The emergence of glass palletizing robot let life more and more convenient, but also to a large extent to save a lot of money for the enterprise, glass palletizing robot should carry out the necessary insulation work.

When the equipment begins to run in winter, insulation measures should be taken, too cold may damage the equipment, so you need to give the equipment insulation, equipment is not used, you can choose to use a large quilt wrapped, which can prevent many parts of the equipment damage.

Glass palletizing robot in addition to the insulation of the equipment, but also pay attention to the use of coolant, in the purchase of products, must decide to use the same type of equipment, which can prevent a lot of unnecessary problems.

Glass palletizing robot abnormal operation of the processing method

1. When the glass palletizing robot is in position, there is no signal from the proximity switch

At this time, three checks should be carried out, first, check whether the proximity switch and induction plate can be misaligned or away; second, check whether the relevant wiring of the adjacent switch can be loose or broken; the other is to see whether the proximity switch can be damaged, and then according to the structure, adjust the orientation according to demand, the damaged part or can be changed from scratch.

2. Glass palletizing robot in place, photoelectric switch no signal

The same process, only the part to be checked is different, first, check the orientation of the transmitting end and receiving end of the photoelectric switch opposite the stacker, as well as the orientation of the reflective photoelectric switch and the reflective plate to see if it can be aligned, but also together with the distance between the direct photoelectric and the detected object, so that it is kept within a reasonable range, if there is a foreign object blocking, it needs to be cleaned up in time.

3. No signal on the magnetic ring switch after the cylinder has moved

Most of them are caused by improper positioning of the stacker magnetic ring switch, in this case, the magnetic ring switch needs to be moved so that its indicator light is on and then it will be fixed, in addition, the same result will be obtained when the piston rod of the glass palletizing robot is not fully extended or retracted in place, and then the cylinder pad can be handled after adjustment.

4. Disadvantages of the solenoid valve

When the glass palletizing robot runs abnormally, the stop button on the operating panel or the field button box should be pressed first, and the equipment should be disposed of after it has stopped, disconnecting the power supply of the equipment if necessary to prevent false starts and fully guarantee the safety of the defective viewing environment.